processing temperature

The valuable conclusions are followed here based on the experimental study and comprehensive analysis.1.In the full array test, taking the coating thickness as indicator, we analyze the steel, processing temperature and processing time on coating thickness.

通过以上分析研究，得到以下结论：1.在全排列试验中，主要以覆层厚度为考察指标，分析钢种、处理温度与处理时间对覆层厚度的影响。

The design has finally realized the temperature control function, including the temperature survey, the demonstration, reports to the police the temperature input, processing.

设计最终实现了温度控制功能，包括温度测量、显示、，报警温度输入、处理。

The relative conductivity of the plants increases under the condition of late spring coldness, and trend gradually increased with the processing temperature and processing time increasing.

倒春寒使植株电导率值增大，并有随着处理温度的降低和处理时间的增加而逐渐增大的趋势。

This paper reports the hot laminating property of Maleic Anhydride grafted polyethylene ( MAH-g-PE) with aluminium ( Al) foil. Experiments shoal. that the peel strength of the resulting laminated film depends largely on processing temperature and grafting degree of MAH.

本文报道了马来酸酐接枝聚乙烯（MAH－g－PE）与铝箔的热粘接性能，并实验确定了热复合所需的温度、压力、时间条件以及接枝率的影响。

Field Evaluation or Corrosion Inhibitor for Low Temperature Section in Processing Liaohe Crude

加工辽河原油低温段缓蚀剂现场评价

Due to the special properties of semi solid metal, lower processing temperature compared to that of liquid metal and lower yield strength compared to that of solid metal, it provide a possibility for the thermal precise forming of metal with high efficiency and low consumption.

由于半固态金属具有特殊属性，即加工温度低（与液态加工比）、变形抗力小（与固态加工比），为高效、低耗实现金属热精密成形提供了一种现实可能。

To its 240 ℃ under tau~ gamma flow curve, 240 ℃ under melt the body surface view viscosity with to compose and the shear rate relations and the melt body surface view viscosity and the processing temperature relations have made the outline.

对其240℃下τ~γ流变曲线、240℃下熔体表观黏度与组成和剪切速率的关系及熔体表观黏度与加工温度的关系作了概述。

Thirdly, in order to enhance the hotbox exchange rate, the processing and classifying technique of the bearing temperature wave of infrared ray are chiefly studied.

三是为了提高热轴兑现率，对红外线轴温波形的处理以及热轴判别技术进行了研究，这是论文的重点。

The results show that microwave high temperature tube furnace has a good green degree, which can be fulfill with the aim of green manufacture, especially in energy consumption, processing time and environmental protection.

结果表明研制的微波高温管式反应器具有很好的绿色度，满足绿色制造的目标，特别在能源消耗，处理时间和环境污染方面具有较好的效果。

the effect of element c on heat-treatment processing temperature window of 600 ℃ high temperature titanium alloy

C元素对600℃高温钛合金热处理温度窗口的影响

These are the basis of studyi ng critical processing temperature for propellants.

这些可以作为研究火药工艺温度的基础.

The spinning solution would better with concentration of 14-16%, inherent viscosity of polymer of 1.5-1.8 and processing temperature of 50-70 ℃.

较适宜的纺丝原液的浓度在14-16%，聚合物的比浓对数粘度为1.5-1.8，加工温度为50-70℃。

The fixed collection terminal takes charge of the measurement, processing, storage and sending of the environmental parameters such as temperature, humidity, illumination and so on, as well as the hand-held receiver is to collect and store the data from the fixed collection terminal.

固定采集端完成对温度、湿度、照度等环境参数的测量、处理、存储以及待发送。手持接收端则完成对固定采集端数据的收集和存储。

Microsoft Visual Basic was used to realize temperature collection at local terminal, data processing and dispose technic parameters.

该系统采用Microsoft visual Basic完成现场终端的温度采集、数据处理及工艺参数处理。

The research work above provides theory basic for exactly modeling and quality controlling of laser processing temperature field having the character of scanning and superposing process.

上述研究工作为具有扫描叠加过程特点的激光加工温度场精确建模和质量控制提供了理论基础。

The experiment shows that the tensile strength and elongation of monofilament depend largely on the processing temperature, morphology and fusion level.

实验还表明，单丝的拉伸强度和相对伸长率与它的加工温度、形态和熔化程度有密切的关系。

Drying temperature and initial moisture content have significant effect on processing quality, and this because different temperature grads and moisture grads formed in different temperature and initial moisture content, and these cause different degree of weeny crack for different internal stress.

而由于不同的热风温度和初始含水率使得热风干燥过程中稻谷内部温度梯度和水分梯度不同，由此产生的应力裂纹程度也不同，使得热风温度和初始含水率对稻谷加工品质的影响比较明显。

Based on researches on thermopaint temperature features and chromaticity theory, this system realizes automatic thermopaint temperature-recognition and data processing with image processing and database techology.

该系统在研究示温漆颜色温度特性的基础上，依据色度学理论、综合运用图像处理与数据库技术实现了示温漆温度判读与数据处理的自动化。

The results showed that the normal growth of refined grain at the pertinent thermal processing temperature range and holding time has no deteriorative effect on the refinement, i.e., the refined grain was still much finer than unmodified grain.

结果表明，热加工温度下材料内部正常晶粒长大不会使其丧失变质细化效果，晶粒仍比无变质细化的铸棒细得多。

the decomposing temperature of complex of copper nitrate with 15-c-5 is over the processing temperature of uhmwpe, so it is used filling in uhmwpe.

15-冠-5与硝酸铜配合物的分解温度超过了UHMWPE的加工温度，决定用它对UHMWPE进行填充改性。

Next, the flowering season and sees the cotton wool time cotton and kapok corolla level air temperature to be high, the flowering season the time interval planting density high processing temperature was also noon high, otherwise early, late.

其次，花期和吐絮期棉花冠层空气温度较高，花期中午时段种植密度高的处理温度也高，早、晚则反之。

The temperature data acquisition terminal for cable is an important part of the Temperature Monitoring System for Underground Cable Junction of Urban Distribution Network, which needs to perform acquisition, processing, saving and wireless transmission of the temperature data.

电缆温度采集终端是城市配电网地下电缆接头温度巡测系统的重要组成部分，负责电缆接头温度的采集、处理、保存和无线传输。